Equipment technical parameters
Host appearance: 1700X1000X1671 (LXWXH)
Total weight: 500KG
Input voltage: 380V AC50/60Hz
Input power: 1.5KW
Rated efficiency: less than 14 seconds/piece.
Press-fit cylinder diameter: Φ63
Air source: 0.4~0.7MPa
Changeover time: Change a set of molds within 20 minutes
The basic shape parameters of the stator (the mold is matched with a specific stator specification)
Outer diameter of stator: φ70-160 mm.
Stator stack thickness: 20-80 mm.
basic configuration
Iron core feeding method: automatic loading and unloading.
End plate feeding method: automatic feeding of left and right vibrating plates
Control button box: Schneider 7-inch touch screen
Controller PLC: Mitsubishi
Pneumatic components: SMC
Low-voltage devices: Schneider (Schneider)
Press-in mold: Cold work mold steel Cr12\Cr12MoV